Econavi Operation; Nanoe™ X Operation - Panasonic NR-F654GT-X6 Operating Instructions Manual

ECONAVI Operation

■
3 ECO functions detect the storage amount and the lifestyle.
Energy is effectively and automatically saved. 
ECONAVI lamp is on during ECONAVI operation.
ECONAVI operates only when the temperature setting is " 2 " for both the freezer and refrigerator compartments.
The storage sensors detect the change in the
Storage Eco
storage amount in the refrigerator compartment.
3 weeks' worth of the number of door opening/
Smart Eco
closing and the change in the storage amount
for each day of the week and every hour are
memorized, analyzed and estimated.
The light intensity sensor 
Night Eco
of the room.
●
The ON/OFF pattern of the lamp may change after 4th week in which what
learnt starts functioning.
●
The brightness of the lamp is lowered approximately 5 minutes after the lamp
turns on. (The lamp can be turned off if it bothers you. P. 20)
●
During detecting the change in the storage amount, ECONAVI lamp flashes
slowly. (Approximately 15 seconds after closing the door of the refrigerator
compartment.)
When the temperature setting of the refrigerator compartment and the freezer
compartment is other than " 2 ", the lamp does not flash but the sensors are
detecting the storage amount.
●
ECONAVI operation may not be performed depending on the usage state of the
refrigerator.
   E ffectiveness differs depending on the ambient temperature, ambient brightness, number of times of opening and closing of
1
the doors and state in which food is stored.
   T he light intensity sensor operates at approx. 20 lux or below.
2
nanoe™ X Operation
■
A nanoe™ is a nano-sized ion particle coated with water
particles.
nanoe™ X are nano-sized electrostatic atomized water
particles with 10 times the OH radicals of nanoe™.
The operation mode of nanoe™ X is switched automatically
regardless of temperature setting.
●
The brightness of lamp can be adjusted. (P.21)
Notices
●
The nanoe™ X emission outlet is on the ceiling side of the vegetable compartment.
●
nanoe™ X is generated by gathering moisture in the air and the effect may change.
●
nanoe™ X operation is switched to powerful mode automatically when the storage sensors detect that the
storage amount is increased or full.
1
2 detects the brightness
Memory of 3 weeks'
worth of life pattern
Period for learning
What learnt starts
functioning
Reflected from the 4th week
Storage sensor
(part of the room lamp
(LED))
ECONAVI lamp
Light intensity sensor
(Underside of the door)
nanoe™ X lamp
Lamp is on:
nanoe™ X operation is in normal mode
Lamp flashes:
nanoe™ X operation is in powerful mode
(5 seconds after the refrigerator
compartment door is closed, the storage
sensors detect the change in the storage
amount.)
Operation
9