Setting To Suit Your Preferences - Panasonic NR-F654GT-X6 Operating Instructions Manual

Appendix

Setting to suit your preferences

■
The temperature for refrigerator compartment and freezer compartment can be set in 9 stages,
more detailed than as " 1 ", " 2 " and " 3 ".
(ECONAVI does not operate when the temperature is adjusted in detail.)
For the refrigerator compartment
Setting Procedure
Press twice and set the temperature of the refrigerator to setting " 1 ".
Press and hold
(There is a beep sound and
10 seconds.)
Press and select the stage of your choice.
(The stage goes higher every one press of
If is pressed when the 9th stage is set
( is on), the setting goes back to " 1 " (
Canceling Procedure
Press twice and set the temperature of the refrigerator to setting " 1 ".
Press and hold
(There is a beep sound, then
The cancellation of the detailed temperature setting is completed.
Set the temperature to fit your usual use.
For the freezer compartment
Operate above ~
●
The temperature of the prime fresh/chilled select room cannot be adjusted in detail.
●
Set this when there is no indication on the notice indicator area.
■
The ECONAVI lamp can be turned off during ECONAVI operation. (P.9)
( Set this when there is no indication on the notice indicator area and the freezer compartment and refrigerator
compartment are set to " 2 ".)
Setting Procedure
Press twice, then press
and hold for at
least 3 seconds.
●
ECONAVI operation is performed even if the above setting is set.
Canceling Procedure
Press twice, then press
and hold for at
least 3 seconds.
20
To adjust the temperature in more detail
for at least 10 seconds.
turns on, then
is on).
for at least 10 seconds.
turns on and
steps with pressing
To turn off the ECONAVI lamp
(1st stage) turns on after
.)
ECONAVI does not
operate even when
the temperature
setting is " 2 ".
flashes.)
instead of .
A beep sounds, the ECONAVI lamp flashes,
and the setting is completed.
(After a short time, the ECONAVI lamp turns
off.)
There is a beep sound, then the ECONAVI lamp
is on for 3 seconds, and the cancellation is
completed.
(After a short time, the ECONAVI lamp turns off.
However, it will remain on during ECONAVI
operation.)
Setting Stage Indicator
9
" 3 "
8
7
6
" 2 "
5
4
3
2
" 1 "
1
Indicator status
On Flashing