Econavi Operation; Nanoe Tmx - Panasonic NR-CW530H Operating Instructions Manual

ECONAVI Operation

The refrigerator detects the opening and closing of the refrigerator door and the brightness
around the refrigerator to control operations automatically to ensure maximum energy saving.*
※ For CW530H models
ECONAVI light
„ ECONAVI operation
● The refrigerator learns the lifestyle patterns of your family from door opening and time
periods of infrequent use to maximize energy efficiency.
● The refrigerator learns your lifestyle patterns from the previous 3 weeks of use and uses
that data from the 4
„ Settings for enabling ECONAVI operation
● ECONAVI operation is enabled automatically when the temperature control for both the
Fridge compartment and the Freezer compartment is set to 4 °C and -20 °C, respectively.
● ECONAVI operation does not operate if the "Prime Fresh+", "Prime Freeze", "Quick
Ice/ Freezing" of CW530H or "Quick Freezing" and "Quick Ice Making" for CW530J is in
operation.
● It is not possible to force start the ECONAVI mode.
Remark
* The effectiveness of the ECONAVI mode is dependant on the ambient temperature, ambient
1
brightness and the number of times the refrigerator door is opened and closed and the state
in which food is stored.
nanoe
TM
● A nanoe is a nano-sized ion particle coated with water particles.
TM
nanoe X are nano-sized electrostatic atomized water particles with 10 times the OH
TM
radicals of nanoe
● nanoe X will start when the refrigerator is plugged in and always run when the refrigerator
TM
is in use. However, nanoe
mode will be reduced if the humidity inside the Fridge compartment is reduced (such as
when storing a few of vegetables, tubers).
● The nanoe X device device may cause a small sound during operation.
TM
26
intensity
sensor
week onwards.
th
X
.
TM
X requires moisture when operating, the effectiveness of this
TM
※ For CW530J models
Light
ECONAVI light
1
Light
intensity
sensor