Chair's Preparation - Promeba PS-190 User Manual

USER GUIDE // ELECTRIC CHAIR PS-190
Review 11/20
03
INSTALATION
03.2 Chair preparation
On receipt of the product it is advised:
· Remove the packaging and distribute the material such that all components are visible.
· Verify that all components / parts in the attached list are present.
The appliance must be checked before each use in order to detect any malfunction and / or damage caused
by transport and / or storage. In particular, check:
· General functionality of the device.
· Cleaning the device (remember that lack of cleanliness can cause the risk of cross-infection).
· Absence of cuts, holes, rips in the structure, including belts.
· Correct fixing of all nuts, bolts and nuts.
· Correct fixing of the belts.
· Correct attachment of the belts.
· State of use (moving parts, wheels, belts, covers)
· Integrity of belts and covers.
· Integrity of the components.
· Integrity of the handles.
· Lubrication of moving parts.
· State of use of the wheels and braking system.
· Operation of springs.
· The emergency vehicle is equipped with a fastening system dedicated to the Promeba product.
· There are safety belts for the immobilization of the patient and they are intact and operating.
· The welds are intact, without cracks or breaks.
· No tube or sheet metal present curves or cracks
If the above conditions are met, the device can be considered ready for use; otherwise, you must immedia-
tely remove the device from the service and contact the manufacturer.
13