Rear Swivel Wheels With Brake - Promeba PS-190 User Manual

USER GUIDE // ELECTRIC CHAIR PS-190
Review 11/20
04
OPERATING
04.1.5 Telescopic backrest
The telescopic backrest positions are:
1 Folded for transport on land
2 Unfolded for stair transport.
It has three unfolding heights to be able to adjust it ac-
cording to the height of the operator and the inclina-
tion of the stairs (Figure 7)
To unlock the backrest movement, pull the black bar up
while pulling or lowering the backrest, depending on
the position you want to adopt (Figure 8).
04.1.6 Belts
Use belts systems to support the patient in the chair.
Follow these instructions to properly anchor the belts:
1 Attach the buckles as indicated in Figure 9, until the
system closes and you see that it does not open.
Instructions for use of the belts:
·
Make sure that they are well secured in their respecti-
ve anchor points, which can be seen in Figure 10.
·
Use a minimum of two belts.
04.1.7

Rear swivel wheels with brake

The rear wheels of the chair are equipped with brakes
to prevent the chair from moving during the transfer of
the patient or during a stop.
- To activate a wheel lock, press down on the rear lock
pedal (Figure 11)
- To deactivate a wheel lock, press down on the front
release pedal (Figure 11)
Keep control of the chair at all times.
Do not use wheel locks as a substitute for operator control.
FIGURE 7 -
TELESCOPIC BACKREST POSITIONS UNLOCK TELESCOPIC BACKREST
FIGURE 9 - CLOSURE BELTS
FIGURE 11 - REAR WHEELS WITH BRAKES
FIGURE 8 -
FIGURE 10 - BELT POSITION
17