HP Pavilion g7-1101er Maintenance And Service Manual page 103

5. If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a. Remove the two crew covers (1) and the two Phillips PM2.5×6.0 screws (2) that secure
the display bezel to the display assembly. The screw covers are available in the Display
Screw Kit, spare part number 640218-001.
b. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom
edge (3) of the display bezel until the bezel disengages from the display enclosure.
c. Remove the display bezel (4). The display bezel is available using spare part number
640204-001.
6. If it is necessary to replace the webcam/microphone module:
a. Detach and release the webcam/microphone module (1) as far as the webcam/microphone
module cable allows. (The webcam/microphone module is attached to the display enclosure
with double-sided tape.)
Component replacement procedures
95