Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for No Butts Bin SR1605-F
Summary of Contents for No Butts Bin SR1605-F
- Page 1 Assembly Instructions Shelter type: SR1605-F SR1605-F-02-150219-USA...
- Page 2 EXPLODED VIEW Tools required: Drill/Screwdriver Spanner Mallet Torx bit Hack saw...
-
Page 3: Table Of Contents
PARTS LIST DIMENSION DIMENSION ITEM DESCRIPTION IMAGE QTY. PART NO. (INCHES) (MM) FRAME 2000 x 1035 78.74 x 40.55 CORNER 110 x 110 4.33 x 4.33 BRACKET PLATE/BRACKET 130 x 30 x 3 8.66 x 1.57 140 x 40 x 5.51 x 1.57 x STUB S1 STUB... -
Page 4: S1C
Step 1 Assemble S1C frames to make up the main structure using CB1 brackets in the corners and JF1 brackets on the straight joints. Attach the S1 stub as shown using JF1, CF1 and JF3 brackets. MEASUREMENTS IN BLUE - MM MEASUREMENTS IN GREEN - INCHES S1 STUB Check the dimensions... -
Page 5: Rb1
Step 2 Attach first R4 rafters using RB1 brackets on the back of the shelter and S1 stubs in the middle. -
Page 6: St9
Step 3 Assemble the T-frame using two ST9 tie bars and a P4 post. Join the two ST9 bars together first using JF3 brackets, then attach the P4 post using two RB2 brackets. DETAIL C SCALE 1 : 4... -
Page 7: Ft1
Step 4 Use L1 brackets to attach the T-bar to the front of the shelter and install the remaining R4 rafters using RB1 brackets on the rear and L1 brackets at the front. Attach the FT1 and FT3 brackets and move the shelter in to its final position before using anchor bolts to secure it to the ground. -
Page 8: Pce2
Step 5 Stick sealing strips (SS) to the rafters and align the PCE2 panels to the outside of the shelter and centralise the PCC2 panel in the centre. Apply more sealing strips to the top of the roof panels, above the previous strips. PCC2 PCE2 PCE2... -
Page 9: Rc2
Step 6 Screw down the RC2 strips directly into the rafter with the 38mm TEC screws to secure the roof panels. Next, clip on the 2MD edge trim to the edges of the roof panels. Then fit the Black plastic caps on exposed nuts and bolts. - Page 10 Notes:...
- Page 11 PLAN VIEW OVERALL DIMENSIONS AND GROUND FIXING POSITIONS 39.173 41.122 1044.50 86.119 2187 Suggested size for concrete base: 200mm/7.87in oversized on all sides...
- Page 12 Touch up any exposed metal should it get scratched CONTACT DETAILS: Email : Sales@nobutts.com Web : www.nobutts.com Tel : 1-888-662-8887 No Butts Bin Company, Inc. 16 Birch Lane, Madison, CT 06443 All Parts and Fixings checked by: Print Name: Signature:...