HIKVISION HWI-T220H Quick Start Manual page 21

Network Turret Camera·Quick Start Guide
this section. And you can take steps of wall mounting as a
reference for the ceiling mounting.
Steps:
1. Paste the drill template (supplied) to the desired mounting
position on the wall.
2. Drill the screw holes and the cable hole in the wall according to
the drill template.
3. Take apart the junction box, and fix the mounting base with three
PM4 screws on the cover of junction box.
Figure 2-7 Drill Template
Figure 2-8 Fix Mounting Base
20
Junction Box
Cover
Mounting Base