HIKVISION U7T Series User Manual page 4

To avoid heat accumulation, good ventilation is

required for the operating environment.
Keep the camera away from liquid while in use for non-

water-proof device.
While in delivery, the camera shall be packed in its

original packing, or packing of the same texture.
Mark Description
Mark
1 Introduction
1.1 Product Features
The main features are as follows:
High performance CMOS sensor

IR cut filter with auto switch

OSD menu with configurable parameters

Auto white balance

Internal synchronization

SMART IR mode

4 in 1 video output (switchable TVI/AHD/CVI/CVBS)

3-axis adjustment

Overview
1.2
1.2.1 Overview of Type I Camera
Figure 1-1 Overview of Type I Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS
1.2.2 Overview of Type II Camera
Enclosure
Mounting
Base
Figure 1-2 Overview of Type II Camera
Note:
Press and hold the switch button for 5 seconds to
switch the video output. Four kinds of video outputs
are available: TVI, AHD, CVI, and CVBS
Table 0-1 Mark Description
Description
DC Voltage
AC Voltage
Camera
Clip Plate
Switch Button
Power Cord
IN DC12V
Video Cable