Page 1
(TM-key: DS1990A / iBUTTON) С - Colour camera - B/W camera Р Pinhole lens Note: Only VIZIT-RF-2 keys from VIZIT ® are supported. Contents of VIZIT doorphone / video doorphone, its features, order of programming and operation are described in the...
Page 2
PARTS LIST BVD-343х Operating Instruction Fasteners Screw - 4х4 Concrete Insert 6х30 SAFETY INSTRUCTIONS The product does not contain voltage above Connect the earthing wire (green/yellow) of the doorstation to the protective earth. WARNING § Do not perform any connections or repair when the power is on! §...
Page 3
Locate the doorstation to avoid: -direct rays of the sun or other light sources -direct hit of rain and snow 50 сm 68° Figure Recommended doorstation position and the camera field of view Coax cable holder Terminals to connect the Control Unit Earthing terminal...
Page 4
+E 4 SP- 3 Green White SP+ 2 GND 1 Figure Doorstation BVD-343x with control unit BUD-302 (M, K-20) electromagnetic lock VIZIT-ML400 and button EXIT 300 DOORSTATION Electromagnetic BVD 43 х BK-4V(MV) Lock VIZIT-ML400 VO 9 RVS-4 VG 8 TX 7...
Page 5
Do not use electromagnetic locks with less than 20 Ohm impedance and not provided with a built-in degaussing module. Do not use electromechanical locks with less than 10 Ohm impedance. If you use an electromechanical lock, a damper diode (50V / 1A , not supplied) shall be connected to its terminals (See Fig.
This manual is also suitable for:
Bvd-343rBvd-343rcpBvd-343rvpBvd-343rtBvd-343tBvd-343tcp...
Show all
Need help?
Do you have a question about the BVD-343 Series and is the answer not in the manual?
Questions and answers