Table of Contents
Advertisement
Settings
-
On
Active domestic appliances that are
signed on to the Miele@home system
are always displayed.
-
Only if there is a fault
Only faults on active domestic
appliances are displayed.
Appliance list
All domestic appliances signed on to
the Miele@home System are displayed.
Once you have selected an appliance,
you can access further settings:
-
Display this Appliance
–
On
The
SuperVision
appliance is turned on.
–
Off
The
SuperVision
appliance is turned off. The
appliance is still signed on to the
Miele@home system. Faults are
displayed, even if the
SuperVision
function for the
appliance has been turned off.
-
Buzzer Tones
You can select whether the audible
signals are turned on (
off (
Off
) for this appliance.
RemoteUpdate
The
RemoteUpdate
displayed and can only be selected if
the requirements for using
Miele@home have been met (see
"Before using for the first time –
Miele@home").
The RemoteUpdate function is used for
updating the software in your oven. If
an update is available for your oven, it
48
function for this
function for this
On
) or turned
menu option is only
will automatically download it. Updates
will not be installed automatically. They
must be initiated manually.
If you do not install an update, you can
continue to use your oven as usual.
However, Miele recommends installing
updates.
Activating/deactivating
The RemoteUpdate function is
activated as standard. Available
updates will be downloaded
automatically but will only be installed if
you initiate installation manually.
Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.
Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele app.
A message will appear on your oven
display if a software update is available.
You can install the update immediately
or postpone this until later. When the
oven is turned on again, you will be
reminded about the update.
Deactivate RemoteUpdate if you do not
want to install the update.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
Advertisement
Table of Contents
