Comtrend Corporation VR-303 User Manual page 90

DSL Mode
Options
Inner/Outer Pair
Bitswap Enable
SRA Enable
Select DSL LED
behavior
G997.1 EOC
xTU-R Serial
Number
Advanced DSL Settings
Click Advanced Settings to reveal additional options.
On this screen you select the required test mode, then click the Apply button.
Field Description
Normal DSL line signal is detected and sent normally
Reverb DSL line signal is sent continuously in reverb mode
Medley DSL line signal is sent continuously in medley mode
No Retrain DSL line signal will always be on even when DSL line is unplugged
L3 DSL line is set in L3 power mode
Data Transmission Rate - Mbps (Megabits per second)
Description
Select the inner or outer pins of the twisted pair (RJ11 cable)
Enables adaptive handshaking functionality
Enables Seamless Rate Adaptation (SRA)
Normal (TR-68 compliant): Select this option for DSL LED to
operate normally (See menu 2.2 LED Indicator)
Off:DSL LED will always be OFF
Select Equipment Serial Number or Equipment MAC Address to
use router's serial number or MAC address in ADSL EOC
messages
89