Table of Contents
Advertisement
WPS/WiFi Button
Press and release WPS-WiFi button to activate WPS (make sure the WPS is enabled
in Wireless->Security page).
Press and hold WPS-WIFI button more than 5 seconds to enable/disable WiFi.
Ethernet (LAN) Ports
Use 10/100 BASE-T RJ-45 cables to connect up to four network devices. These ports
are auto-sensing MDI/X; so either straight-through or crossover cable can be used.
USB Host Port (Type A)
This port can be used to connect the router to the print server.
DSL Port
Connect to an ADSL2/2+ or VDSL with this RJ11 Port. This device contains a micro
filter which removes the analog phone signal. If you wish, you can connect a
regular telephone to the same line by using a POTS splitter.
8
Advertisement
Table of Contents
