E-Mail Messages - Nokia RM-357 User Manual

Settings Text message or Multimedia
message Receive report. The reports are saved in
the Reports folder.

E-mail messages

Select Menu Messaging Mailbox.
To receive and send e-mail, you must have a remote
mailbox service. This service may be offered by an
internet service provider, a network service provider,
or your company. Your device is compliant with
internet standards SMTP, IMAP4 (revision 1), and POP3,
and with different vendor-specific e-mail solutions.
Other e-mail providers may offer services with different
settings or features than those described in this user
guide. Contact your e-mail provider or service provider
for more details.
Before you can send, receive, retrieve, reply to, and
forward e-mail on your device, you must also do the
following:
Configure an internet access point. See "Internet
access points", p. 47.
Set up an e-mail account, and define the e-mail
settings correctly. To do this, use the mailbox guide,
or define the account manually. See "E-mail account
settings", p. 43.
Contact your service provider for the correct settings.
Cyan Cyan Cyan Cyan Magenta Magenta Magenta Magenta
Set up your e-mail with the
mailbox guide
If you select Menu Messaging Mailbox, and have
not set up your e-mail account, you are prompted to
do so. To start setting up the e-mail account with the
mailbox guide, select Yes.
1. To start entering the e-mail settings, select Start.
2. In Mailbox type, select IMAP4 or POP3, and select
Next.
Tip: POP3 is a version of the post office
protocol that is used to store and retrieve e-
mail or internet mail messages from a server.
IMAP4 is a version of the internet message
access protocol that lets you access and
manage e-mail messages while the
messages are still on the e-mail server. You
can then choose which messages to
download to your device.
3. In My e-mail address, enter your e-mail address.
Select Next.
4. In Incoming mail server, enter the name of the
remote server that receives your e-mail, and select
Next.
5. In Outgoing mail server, enter the name of the
remote server that sends your e-mail, and select
Next. Depending on your mobile operator, you
might have to use your mobile operator's outgoing
mail server instead of your e-mail provider's.
6. In Access point, select the internet access point
your device should use when it retrieves the e-mail.
If you select Always ask, each time the device starts
Yellow Yellow Yellow Yellow Black Black Black Black
37