E-Mail Messages - Nokia RM-170 Manual

file:///C:/USERS/MODEServer/grawei/18212506/rm-170_siperia/en/issue_1/rm-170_siperia_en_1.xml file:///C:/USERS/MODEServer/grawei/18212506/rm-170_siperia/en/issue_1/rm-170_siperia_en_1.xml

E-mail messages

To receive and send mail, you must have a remote
mailbox service. This service may be offered by an
Internet service provider, a network service provider, or
your company. Your device is compliant with Internet
standards SMTP, IMAP4 (revision 1), and POP3, and with
different push e-mail solutions. Other e-mail providers
may offer services with different settings or features
than those described in this user guide. Contact your e-
mail provider or service provider for more details.
Before you can send, receive, retrieve, reply to, and
forward mail on your device, you must also do the
following:
• Configure an Internet access point (IAP). See "Access
points," p. 67.
• Set up an e-mail account, and define the e-mail
settings correctly. See "E-mail account
settings," p. 40.
Follow the instructions from your remote mailbox and
Internet service providers. Contact your network and
Internet service providers or operator for the correct
settings.
Set up your e-mail
If you select Mailbox and have not set up your e-mail
account, you are prompted to do so. To start setting up
the e-mail account with the mailbox guide, select Yes.
1. To start entering the e-mail settings, select Start.
2. In Mailbox type, select IMAP4
Next.
Tip: POP3 is a version of the post office
protocol that is used to store and retrieve
e-mail or Internet mail messages. IMAP4 is
a version of the Internet message access
protocol that lets you access and manage
e-mail messages while the messages are
still on the e-mail server. You can then
choose which messages to download to
your device.
3. In My e-mail
insert @ or other special characters, press *. To
insert a full stop, press 1. Select Next.
4. In Incoming mail
remote server that receives your e-mail, and select
Next.
5. In Outgoing mail
server that sends your e-mail, and select Next.
Depending on your mobile operator, you might
have to use your mobile operator's outgoing mail
server instead of your e-mail provider's.
6. In Access point, select the Internet access point your
device should use when it retrieves the e-mails. If
you select
retrieve e-mail, it asks which Internet access point
it should use, but if you select an access point, the
device makes the connection automatically. Select
Next.
7. Enter a name for your new mailbox, and select
Finish.
When you create a new mailbox, the name you give to
the mailbox replaces
or POP3, and select
You can have up to six mailboxes.
Cyan Cyan Cyan Cyan Magenta Magenta Magenta Magenta Yellow Yellow Yellow Yellow Black Black Black Black
Page 37 Page 37 Jul 25, 2006 10:15:41 AM Jul 25, 2006 10:15:41 AM
address, enter your e-mail address. To
serv., enter the name of the
serv., enter the name of the remote
Always ask, each time the device starts to
Mailbox in the Messag. main view.
37