Barcode Reader - Nokia RM-357 User Manual

Your service provider may preset some or all access
points for your device, and you may not be able to
create, edit, or remove them.
Contact your company's IT department for the correct
settings.
Open a destination, select a VPN access point, select
Edit, and define the following:
Connection name — Enter a name for the VPN
access point.
VPN policy — Select the VPN policy to combine with
the internet access point.
Internet access point — Select the internet access
point with which to combine the VPN policy to
create secure connections for data transfer.
Proxy server address — Enter the proxy server
address of the private network.
Proxy port number — Enter the proxy port
number.
Use a VPN connection in an
application
You may have to prove your identity when you log on
to the enterprise network. Contact your company's IT
department for the credentials.
To use a VPN connection in an application, the
application must be associated with a VPN access point.
Tip: You can configure the application's
connection setting to Always ask, in which case
you select the VPN access point from a list of
connections when a connection is established.
82
Cyan Cyan Cyan Cyan
1. In the application in which you want to create a VPN
connection, select a VPN access point as the access
point.
2. If you are using legacy authentication, enter your
VPN user name and passcode or password. If the
SecurID token has become out of synchronisation
with the clock of the ACE/Server, enter the next
passcode. If you are using certificate-based
authentication, you may have to enter the key store
password.

Barcode reader

Select Menu Tools Barcode.
Use the Barcode reader application to decode different
types of barcodes. The codes may contain information
such as URL links, e-mail addresses, and phone
numbers. The Barcode reader uses the camera in your
device to scan codes.
To scan a code, select Scan
between the red lines on the display. The decoded
information appears on the display.
To save the scanned data, select
data is saved in .bcr format.
To view previously saved, decoded information in the
main view, select Saved data.
Magenta Magenta Magenta Magenta Yellow Yellow Yellow Yellow Black Black Black Black
code, and set the code
Options Save. The