Nokia RM-357 User Manual page 48

from the list and then Options
point to use the access point as a basis for the new
one.
3. Define the following settings.
Connection name — Enter a descriptive name
for the connection.
Data bearer — Select Packet
Access point name — Enter the name for the
access point. The name is usually provided by
your service provider.
User name — Enter your user name if required
by the service provider. User names are often
case-sensitive and provided by your service
provider.
Prompt password — Select Yes
password each time you log into a server or
to save the password in your device memory and
automate the login.
Password — Enter your password if required by
the service provider. The password is often case-
sensitive and provided by the service provider.
Authentication — Select Secure
password always encrypted, or
your password encrypted when possible.
Homepage — Enter the web address of the page
you want to display as the home page when you
use this access point.
4. After defining the settings, select
Advanced settings to define the advanced
settings or Back to save the settings and exit.
48
Cyan Cyan Cyan Cyan
Duplicate access Set up an access point for
WLAN manually
1. Select Menu Tools
Connection Access
2. Select Options New access point
data.
new access point, or select an existing access point
from the list and then
point to use the access point as a basis for the new
one.
3. Define the following settings.
Connection name
for the connection.
to enter your Data bearer — Select
No WLAN network name
set identifier (SSID), that is, the name that
identifies the specific WLAN, select
manually. To select the network from the
WLANs in range, select
Network status
to send your
you are connecting to is hidden or
Normal to send
not hidden.
WLAN network mode
Infrastructure, devices can communicate with
each other and with wired LAN devices through
a WLAN access point. If you select Ad-hoc,
devices can send and receive data directly with
Options
each other, and no WLAN access point is needed.
WLAN security mode
same security mode that is used in the WLAN
access point. If you select WEP (wired equivalent
privacy), 802.1x, or WPA/WPA2 (Wi-Fi protected
access), you must also configure the relevant
Magenta Magenta Magenta Magenta Yellow Yellow Yellow Yellow Black Black Black Black
Settings
points.
to create a
Options Duplicate access
— Enter a descriptive name
Wireless LAN.
— To enter the service
Enter
Search for networks.
— Select Hidden if the network
Public if it is
— If you select
— You must select the