SELFSAT SNIPE DOME 2 User Manual page 19

B. Assemble 2pcs of M4x20 bolt to fix the four(4) mounting plates each
B-1
Place main unit on the top of fixed plate. Put back
the mounting plate on the silicone applied and
make two(2) holes (2mm) with power drill
B-3
7
Assemble mounting plate using two(2) M4x20
screws
C. Apply silicone between mounting plate and masking tape
C-1
Apply silicone around mounting plate edges
C-3
Remove masking tape and allow to dry
B-2
Apply silicone on the holes
B-4
8
Re-apply silicone to cover tightened screws
C-2
Tidy silicone surface
C-4
Repeat the same for the remaining mounting
plates
ENGLISH - 18