Subscribe to Our Youtube Channel
Related Manuals for ALLEN & HEATH XONE 96
Summary of Contents for ALLEN & HEATH XONE 96
- Page 1 ALLEN&HEATH ® ® GUIDE: REPLACING FADERS ALLEN&HEATH XONE:96 Guide: Replacing Faders...
- Page 2 Limited One Year Manufacturer’s Warranty Allen & Heath warrants the Allen & Heath - branded hardware product and accessories contained in the original packaging ("Allen & Heath Product”) against defects in materials and workmanship when used in accordance with Allen & Heath's user manuals, technical specifications and other Allen &...
- Page 3 REPLACING FADERS The XFADER and main channel faders on a DJ mixer are heavily used and can suffer considerable wear and tear. The audio design using VCAs prevents clicks and scratchiness as the fader wears. Over time, however, the me- chanical movement may become stiff, or sloppy, or ingrained with dirt.
- Page 4 REPLACING FADERS continued Step 1: Ensure power switch on the mixer’s rear panel is turned OFF. • Disconnect the mains cable from AC mains supply and mixer’s IEC socket. • Step 2: Place the mixer face-down on a clean surface. Remove and retain 2 Torx screws securing the front panel •...
- Page 5 REPLACING THE XFADER Step 4: To replace the XFADER With care, disconnect the black wire- • form connecting the XFADER assembly to the internal PCBA, as shown. Remove and retain 2 screws securing • the XFADER assembly to the top panel Take the cap off the XFADER shaft and •...
- Page 6 REPLACING CHANNEL FADERS Step 6: To replace Channel Faders Remove the cross-fader assembly prior to replacing channel fader/s, as described in Step 4 above. • Remove and retain 2 screws securing the channel fader PCBA. • Slide the Channel Fader PCBA away from its connection to the main top panel PCBA as shown. •...
- Page 7 For more information, please visit our website: www.allen-heath.com ALLEN&HEATH XONE:96 Guide: Replacing Faders...
Need help?
Do you have a question about the XONE 96 and is the answer not in the manual?
Questions and answers