Verizon Wireless PX-700 Manual page 4

INSTALLATION AND SETUP INSTALLATION AND SETUP
This section will guide you through the installation and
setup process for VZAccess Manager. Before getting started,
you should become familiar with the documentation that
came with your wireless device.
CD'S
You purchased a UM175, there is only one CD that contains
VZAccess Manager and USB modem drivers.
GETTING STARTED
Follow these steps to install VZAccess Manager:
1 Turn on your computer and close all applications.
2 Insert the CD-ROM into your CD drive.
3 If set up does not automatically start, click the Start
button on the taskbar and choose Run. Type D:\Start
(where D is the letter of your CD-ROM drive) and click
OK.
4 Follow the steps in the next section.
Important: If using a USB device, VZAccess Manager software
@
must be installed before you insert the USB device in to the
computer for the first time. Only after the software has been
installed can Windows successfully install and configure the
USB device.
4 4
GETTING STARTED