Verizon Wireless PX-700 Manual page 38

a network that broadcasts its network name is to select
the Wi-Fi network connection when it appears, and then
select "Connect." If it is password protected you will be
prompted to enter your WEP (Wired Equivalent Privacy)
key.
NOTE: If you manually add a Wi-Fi network, when VZAccess
@
Manager finds it, its signal strength will be displayed to the
right of the network name when you are within coverage of
that network. If you incorrectly entered the name, the signal
strength will never indicate any signal.
NOTICE: Note that with certain Wi-Fi adapters the signal
@
strength for Wi-Fi networks is not accurate until you connect
to the network.
• Edit: If you select a connection in the Preferred Network
list, the Edit button will become active. Pressing it will
provide you with three additional tabs that will be
discussed below.
• Remove: This will remove any other Wi-Fi networks you
have added or connected to in the past. Just select the
network, then select "Remove."
NETWORK TAB
From the Wi-Fi tab (above, "Tools," "Preferences," "Wi-
Fi" tab) if you select a network listed under "Preferred
Networks" then select the "Edit" button or if you select
the "Add" button, one of the following options will be
displayed:
38
PREFERENCES
WI-FI PREFERENCES