Control Panel - Progress PGU0811 User Manual

If you have any doubts
regarding where to install the
appliance, please turn to the
vendor, to our customer service
or to the nearest Authorised
Service Centre.
It must be possible to
disconnect the appliance from
the mains power supply. The
plug must therefore be easily
accessible after installation.
Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a

CONTROL PANEL

Power indicator light
1
Temperature regulator and On/Off
2
switch
FastFreeze light
3
Switching on
1. Insert the plug into the wall socket.
2. Turn the Temperature regulator
clockwise to a medium setting.
If the temperature inside the appliance is
too high, the Alarm light will blink and the
acoustic alarm will turn on.
1 2 3
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the E.E.C.
Directives.
Ventilation requirements
CAUTION! Refer to the
installation instructions for the
installation.
Door reversibility
Please refer to the separate document
with instructions on installation and door
reversal.
CAUTION! At every stage of
reversing the door protect the
floor from scratching with a
durable material.
4 5
FastFreeze switch and alarm reset
4
switch
Alarm light
5
3. Push the FastFreeze switch and the
acoustic alarm will turn off. The Alarm
light will blink until the internal
temperature has reached a level
required for the safe conservation of
frozen food.
Progress 7