Table of Contents
Advertisement
7. Daily Maintenance
1. Turn the power switch OFF when the last count has been completed.
2. Clean the Hopper coin plate and the coin track (use a brush and an air
duster to do so).
3. Turn off the unit if it won't be used for long a time
4. If you realize the unit is not performing as usual, or you are experiencing
technical problems, please contact your local dealer for technical support.
8. Error Code Messages
ERROR
E1-E8
E9
E10
CAUSE
Counting sensor error
Detecting sensor error or
machine has a coin jam
Motor detecting sensor error
SOLUTION
Counting sensor is dusty
or damaged, contact
support
Remove the jammed
coin, contact support
Code sensor or motor
damaged, contact support
14
Advertisement
Table of Contents
