Troubleshooting Guide - Canon EOS 350D Instruction Manual

Troubleshooting Guide

If there is a problem, first refer to this Troubleshooting Guide. If this
Troubleshooting Guide does not resolve the problem, contact your
dealer or nearest Canon Service Center.
Power Source
The battery cannot be recharged.
¡
You are using the wrong battery.
s
Use Battery Pack NB-2LH.
¡
The battery pack is not properly attached to the battery charger.
s
Attach the battery pack properly to the charger. (p.20)
The camera does not operate even when the power switch is set to < 1 >.
¡
The battery is exhausted.
s
Recharge the battery pack. (p.20)
¡
The battery is not installed properly.
s
Install the battery properly. (p.22)
¡
Battery compartment cover is not closed.
s
Close the battery compartment cover securely. (p.22)
¡
CF card slot cover is not closed.
s
Close the CF card slot cover securely. (p.26)
The access lamp still blinks even when the power switch is set to < 2 >.
¡
If you set the power switch to <2> right after shooting, the
access lamp will still light/blink for a few seconds until the
camera finishes recording the image onto the CF card.
s
When the camera finishes recording the image to the CF card, the
access lamp will stop blinking and the power will turn off
automatically.
The battery becomes exhausted quickly.
¡
The battery is not fully charged.
s
Recharge the battery fully. (p.20)
¡
The battery's service life has expired.
s
Replace the battery pack with a new one.
154