Omega CT485B-110V-G-AL User Manual page 56

Power (Recorder)
Analog Voltage Input Adapter (Optional)
Mechanical
dc:
ac:
Power
Requirements:
ac Power Jack
Voltage:
Input:
Input Protection:
Input Impedance:
Input Connections:
Cable Length:
Dimensions:
(H x W x D)
Weight:
Mounting:
Case:
Miscellaneous:
The CT485B Chart Recorder may be susceptible to radio
frequency fields at selected frequencies. The reading error
can be up to 10% of reading (Both Temperature and
Humidity) when exposed to RF fields (Testing was performed
to,IEC1000-4-3, 80% AM Modulation).
Four (4) "D" size alkaline batteries; greater than
1 month continuous operation in 32 day mode;
bulbs will not light on battery power.
Recommended battery type: Duracell Type
MN1300 "D" size batteries for best performance
at low temperatures.
110Vac or 220Vac 50/60 Hz stepped down to
nominal 9Vdc using ac adaptor provided
300 mA "normal" during pen movement for
battery (dc power); 500 mA "normal" during pen
movement for ac power using ac adaptor.
(Note: The light bulbs draw 200 mA of current).
8.3 to 12.4 Vdc, (nominal 9Vdc) 1A max.
An ac adaptor is supplied
20 mV dc to 1200 mV dc records as 2° to 120°F
up to 20Vdc or 10Vac RMS
330k ohms minimum
Banana jacks, 0.75" spacing
12" (30.5cm)
13 ⁄ " x 10 ⁄ " x 2 ⁄ "
3 11 5
1 6 1 6 8
(33.5 x 27.1 x 6.7 cm)
Approx. 7 lbs, including alkaline batteries
"Keyhole" slots for wall mounting; foot cover for
benchtop use
Rugged ABS plastic, color: gray or white
Swing-out stabilizing arm for bench top use,
decorative foot cover for wall mounting, and 6 ft
remote sensor cable for remote sensing
(USE ONLY ONE 6 FT REMOTE SENSOR CABLE
PER RECORDER FOR ACCURATE READINGS)
NOTE
11
Specifications
11-3