Step Three
Ensuring the holes along the Centre Rail (4) are facing upwards, attach to the underside of the
Tubing Slats (5) using Screw M6 x 63mm (C) and Screw Nut (D).
Step Four
When attaching the Slats (6), please ensure they have the curved side facing up.
Insert the Cap End (E) into the Side Rail (3), then insert a Slat (6) into the Cap End (E). Repeat
this process of attaching all slats to the Side Rails (3). Finall
Slat Connector (F) and secure to the Centre Rail (4). Repeat this process for all slats.
3
4
3
4/6