Resilient Timer Intervals; Timer Command - Xeos Technologies Inc. Resilient User Manual

Resilient Timer Intervals

The following are the parameters for each mode:
Timer T0
SBD 12h
GPS 12h
Legend
SBD
GPS
T0 – T7
<T#>
#s/m/h/d
Min
Max
Timers
Timer 0 Normal
Timer 1 Start-up
Timer 2 Alarm
Timer 3 Low Battery Used when there is a low battery
Timer 4 No GPS Fix
The default timer settings of the Resilient are suitable for most use cases.
Timers 5 - 7 are not used in the Resilient.

Timer Command

The $timer command will return the timer intervals all configurable settings. The response will
also be returned when timers are changed:
The timer string returned includes a summary of all timers. The first five timers (0 – 4) are used.
Resilient User Manual Version 2.0
<T1> T2
10m 10m
10m 5m
SBD (Iridium) transmission interval
GPS acquisition interval
Timer number
Timer currently in use
Interval in seconds/minutes/hours/days
Minimum allowed interval for this timer
Maximum allowed interval for this timer
Used if none of the following modes are triggered
Used for the first hour after the unit is powered on
Used once the unit is inverted or exits its watch circle
Used when the GPS module fails to acquire a fix
T3 T4
1d 12h
1d 12h
Min-Max
5m – 1d
5m – 1d
15