4.
To view messages, click on the Message Log tab above the map
5.
Multiple targets can be viewed on the map simultaneously by clicking on all the devices
you wish to monitor on the left hand list.
Remote Configuration of the Resilient
Unlike other Xeos Iridium beacons, Resilients must be sent commands via Liquid Robotics' WGMS
service. To learn how to send commands using WGMS, please contact
Note:
Change to configuration only takes place once the Resilient receives the message. That
means that if the Resilient is set to check messages hourly, it will not change its operational
behavior until it has checked at its scheduled time for changes.
Xeos Beacon Bluetooth App
Select Xeos products can be configured locally using the
of communication requires no disassembly.
The Bluetooth app allows for communication, configuration, logging and firmware updates. A
detailed document on how to use the application can be found
See the
Bluetooth
section for Bluetooth functionality as it pertains to the Resilient.
Resilient User Manual Version 2.0
Liquid
Robotics.
Xeos Beacon Android
App. This method
here.
13