Xeos Technologies Inc. Resilient User Manual page 25

 Flip the Resilient to use the bottom GPS antenna to determine the nature of the issue
(antenna-related, system related or location-related).
Device is transmitting too frequently/not enough
 Check timer intervals with $timer command
 Check timer currently being used with the $status command (Returns TMde=1)
 Change timer interval as required
Device is going into alarm when it should not (Watch Circle or Inversion)
 Watch circle centre is in the wrong location or an unsatisfactory radius
o $setcircle X Y Z to change circle and radius
o $setcircle 0 0 Z to change radius only
o Watch circle warn can also be triggered if location is too close to the radius
(default 85% of the way to the boundary)
 Inversion triggered when the device has overturned and is using a different antenna than
the last time that it transmitted.
o While the Resilient will send an Orientation Change message whenever this
happens, Timer 2 will not be used if the inverted event is turned off with
$evtconfig 2 2 n
Resilient User Manual Version 2.0 25