Macnaught BOP20 BP20-PH Owner's Manual

Owners Manual
INTRODUCTION
Macnaught has designed and manufactured this pump to the highest quality standards using
premium quality materials and workmanship.
PLEASE READ THIS SAFETY INFORMATION CAREFULLY BEFORE USE.
Read and retain this instruction manual to assist you in the operation of your new product.
POWER HEAD SAFETY WARNINGS
Failure to follow all instructions listed may result in electric shock, fire, serious injury and/or
damage to the power tool. The term "power tool" in all of the warnings listed refers to your battery
operated (cordless) power tool.
DO NOT use product if the product is damaged or the switch does not turn the pump on.
•
Only use "ORIGINAL" Macnaught replacement parts, battery or charger
•
DO NOT store or use the power tool and battery pack in locations where the temperature may reach
•
or exceed 40°C/104°F.
DO NOT use with Charger or Battery if equipment is worn or damaged, (remove from service)
•
GENERAL SAFETY
DO NOT lift the power head with locking lever. Handle power head with care. DO
•
NO DROP.
Make sure the power head is securely connected/attached to the stem.
•
DO NOT leave the power head sitting on top of the stem unlocked.
•
Stop operating the pump if any leakings at the joints are noticed.
•
DO NOT modify the pump in any way.
•
DO NOT use the product in potentially explosive atmosphere or areas.
•
DO NOT expose the product to fire and source of heat.
•
Use product in well ventilated area.
•
Only use genuine Macnaught battery and chargers with this product.
•
Only use genuine Macnaught battery and chargers with this product.
•
BP20-PH-inst-issue2
POWER HEAD
BP20-PH
1