WRL Instruction Manual
Lunar Tide Cycle
The lunar tide cycle function may be set to display the position of the moon in relation to its
revolution around the earth. The moon's position is the primary, although not the only, factor in
predicting high and low coastal tides. High tides are generally present when the moon is overhead
or when the moon is 180 degrees from overhead. Low tide is generally present when the moon is in
the 90 degree or the 270 degree position. This method of predicting tide works well on the West and
East coasts. On the Gulf coast, this method is not as successful.
To set the
tide clock,
tide cycle duration. The tide cycle duration may be set from 1 to 99 hours. Twelve hours and fifty
one minutes is the normal number for a tide clock. The second item to be entered is the time of the
high tide. This information is generally found in the newspaper. If predicting the tide does not apply
to your area, any cycle that lasts between 1 and 99 hours may be displayed.
Clearing the Memories
When the clear button is depressed and held, the unit will display the date and time the instrument's
memory was last cleared. In order to clear the memories, the clear and minimum button must be
pushed at the same time. The items cleared are as follow: minimum and maximum, wind speed,
temperature (indoor, outdoor, and aux), barometric pressure and humidity. Daily rainfall is cleared
automatically at midnight every night. Monthly rainfall is cleared automatically at midnight on the last
day of the month. Term rainfall may be cleared at any time by the user by depressing clear and last
rain at the same time. The term rainfall register may be used for any term desired by the user, but is
most commonly used to account for yearly rainfall. The memories can also be changed by using
TWI_LOG.
Rainfall history mode
If the information is available, the actual daily, monthly and term rainfall amounts that occurred
before the installation of the weather station may be manually entered. To do so enter the rain
history mode, by pressing select and last at the same time. The first item to appear will be the dally
rainfall total. Press minimum or maximum to input the correct amount. Press select again and the
monthly rainfall amount will appear. Press select again and the unit will display term rainfall, change
as desired. Press select again and the unit will return to normal mode.
Texas Weather Instruments, Inc.
follow the directions in the time set function. The first item to be entered is the
WRL Instruction Manual
Need help?
Do you have a question about the Weather Report Logger WRL-25 and is the answer not in the manual?
Questions and answers