Texas Instruments Weather Report Logger WRL-25 Manual page 17

WRL Instruction Manual
7) 2nd humidity sensor calibration factor
8) Wind direction calibration, increase number to move clockwise or decrease number to move
counterclockwise.
9) Rain collector type
counter)
10) Rain increment value
collectors should be set for 0.01 including TWI)
11) Daily rainfall history register
12) Monthly rainfall history register
13) Term rainfall history register
14) Report output interval
hours or minutes depending on the setting of the
15) Report output interval
in minutes or seconds
16) Report Min/Max turns on the min-max function for the log and the
printer).
17) Report end of day- sends a formfeed at midnight to the
18) Report Interval Units sets the ouput values to minutes or seconds.
19) Sets which command the report output will use, r, R, q or Q.
20) Sets the years..
21) Sets the month.
22) Sets day of month.
23) Sets the day of the week. (1=Sunday, 2=Monday, 3= Tuesday, 4=Wednesday, 5=Thursday, 6=
Friday, 7=Sunday)
24) Sets hours in 24 hour format..
25) Sets minutes
26) Sets Seconds.
27) Sets the logging interval hours
28) Sets the logging interval
29) 0 for English or 1 for Metric scale
30) Sets the ID number
31) Displays number of power ups (0 through 255)
32) Displays the rainfall rate interval
33) Wind Speed scale, changes wind speed to knots when set to 1. A 0 setting when in English will
output miles per hour and a 0 when in metric will output kilometers per hour.
34) Time display, when set to 0 the unit will display time in a 24 hour military format. When set to 1
the unit will be in AM or PM.
35) Aux disable, when set to 0 will cycle the temperature display through three values, indoor
temp, outdoor temp and the aux value (aux temperature or solar). When Aux disable is set to 1 the
temperature display will cycle through indoor and outdoor temperatures only.
36) Wind speed and direction, when set to 0 the unit outputs one minute
RS-232 port. When set to 1 the output is instant. This setting does not effect the display which has
its own button.
37) Selects baud rate, 0=38.4 1=19.2, 2=9600, 3=4800, 4=2400, 5=1200, 6=600, 7=300.
(Warning! Do not change this number unless you understand that you will lose
communication with the WRL until the host baud rate is also changed. Also note that
TWI_LOG does not support a baud rate fo 38.4.)
Texas Weather Instruments, Inc.
(most rain collectors are type 2 including TWI, 0 turns of the rain collector
( the value that is added for each click of the rain collector, most rain
HI, sets the automatic data dump interval to the RS232. Value can be in
LO, sets the automatic data dump interval to the RS232. Value can be
depending on the setting of the report interval unites (19).
(saves data in the units memory when set)
minutes.
(0 through 255)
in minutes.
report interval units
report output
RS-232 (for the printer).
(19)
(for the
average wind data
WRL Instruction Manual
to the