Epson SureColor T5170M Quick Start Manual

Epson SureColor
®
Start Here
IMPORTANT: Before using this product, make sure you read these instructions
and the safety instructions in the online User's Guide.
Note: Availability of models varies by country.
Choose a Location for the Printer
Choose a location for the printer that is near a wall outlet where the power cord
can be easily unplugged. Avoid places subject to rapid changes in temperature
and humidity. Also keep the printer away from direct sunlight, strong light, or
heat sources.
Make sure to place the printer on a flat, stable surface with enough space on
all sides (see illustrations below). The surface supporting the printer should be
wider than the space between the rubber feet on the bottom of the printer and
capable of supporting the weights shown below.
SureColor T2170/T3170
1.97 in.
(50 mm)
14.57 in.
(370 mm)
Weight: 59.52 lbs (27 kg)
Unpack
1
Make sure you have these items:
Printer and roll spindle
Note:
• The output tray is available as an optional accessory (part number
C12C936361) for the SureColor T2170. See the online User's Guide for
instructions on using the output tray.
• The SureColor T5170 comes with a stand and paper basket. For the
SureColor T2170 and T3170, a stand and paper basket are available as
an optional accessory (part number C12C933151). See the online User's
Guide for instructions on assembling these parts.
T2170/T3170/T5170
®
SureColor T5170
5.9 in.
(150 mm)
1.97 in.
(50 mm)
12.2 in.
(310 mm)
1.57 in.
(40 mm)
Weight: 101.41 lbs (46 kg)
Ink cartridges (4) Power cord
Output tray
Limited warranty
(SureColor T3170/T5170)
WARNING:
grip the printer as shown in the illustration.
Note: Do not hold the printer by its paper support.
2
Remove the plastic sheet and all tape from the outside of the printer.
5.9 in.
(150 mm)
3
Open the left cover.
4
Remove the tape and the protective piece.
5
Close the left cover.
6
Open the front cover.
7
Turn and remove the protective piece.
The printer requires two people to lift and move it. Make sure to