Table of Contents
Advertisement
Setting
Auto Fit Page
Custom Size
Original Type
Advanced Settings
Setting
Original Size
Top Offset
Options
On
Off
Various settings
Text/ Line Drawing
Tracing Paper
Blueprint
Options
Auto Detect
ISO A
US-ANSI
US-ARCH
JIS-B
ISO B
User-Defined
0.0 to 3.94 inches
0.0 to 100.0 mm
147
Description
Select On to fit the short edge of the
image to the width of the paper
Note: This setting is not available if
paper is not loaded into the printer.
Select Actual Size to print using the
image size or select a different output
size
Selects the type that corresponds to
the loaded original
Description
Determines the size of the scanned
original. In most cases, Auto Detect
should be used. Tracing paper and
the optional carrier sheet are not
detected automatically.
Selects the amount of area at the
top of the scanned original that will
not be scanned. If you are using the
optional carrier sheet, the value
should be 0.75 inch (19 mm).
Advertisement
Table of Contents
