Setting Up And Connecting; Setting Up And Connecting The Device; Waste Water Connection; Drinking Water Connection - Siemens SP63HX64KE User Manual

Hide thumbs Also See for SP63HX64KE:
Table of Contents

Advertisement

NL Set up and connect
s Other documents containing information
tie
s Mounting material
s Steam protection plate
s Salt filling aid funnel
s Power cord
s Quick Guide
Setting up and connecting the
device
You can install your under-counter or
built-in appliance in the kitchen unit
between wooden and plastic walls. If
you subsequently install the device as
a free-standing device, you must
secure the device against tipping over,
e.g. by screwing it to the wall or
installing it under a continuous
worktop that is firmly connected to
the adjacent cupboards. .
Observe the safety instructions." →
1. "
Page 4
Observe the instructions for the
2. "
electrical connection."
→ Page 13
Check the contents of the package
3.
and the condition of the device.
The required installation dimensions can be found
4.
in the installation instructions.
Level the appliance using the
5.
adjustable feet.
Pay attention to a firm stand.
Install the waste water
6. "
connection." → Page 12
Install the drinking water
7. "
connection." → Page 12
Connect the device to the
8.
power.
12

Waste water connection

Connect the appliance to a drain water
connection so that the contaminated
washing water can be drained.
Install waste water connection
The necessary steps can be found in
1.
the supplied installation manual.
Connect the drain hose to the
2.
connection nipple of the siphon
using the supplied parts.
Make sure that the drain hose is
3.
not kinked, crushed or tangled.
Make sure that the water does not
4.
flow out by a sealing cap in the
waste water connection.

Drinking water connection

Connect the device to a drinking
water connection.
Install drinking water connection
Note
s When you replace the device,
you can use a new water supply
hose.
The necessary steps can be found in
1.
the supplied installation manual.
Connect the device to the
2.
drinking water connection using
the enclosed parts.
The "technical data"
→ Page 57 consider.
Make sure that the drinking water
3.
connection is not kinked, crushed
or entangled.

Advertisement

Table of Contents
loading

Table of Contents