Autoopen Dry; Setting Up And Connecting; Scope Of Delivery; Device - Siemens SN55ES08CE Instructions For Use Manual

Table of Contents

Advertisement

Setting up and connecting

Sensor level
SE:01
SE:02

3.4 autoOpen Dry

The device door opens automatically
during the drying phase. This results in
particularly economical drying.
For best drying results, wait for the
end of the program before clearing
out the dishes. The program is
finished when the display shows
"00h:00m".
If the automatic door opening is
deactivated, energy consumption
increases and the drying phase is
usually shortened.
→ "Overview of the basic
settings", page 38
12
Description
Does the program
strength even with
small amounts of dirt
conditions for
effective elimination
leftover food. The
power consumption
and water consumption
needs will be
adapted accordingly.
Does the program
strength for difficult ones
Terms of use
gen, e.g. B. very
dried food
sereste. Recommended
Setting when
use of organic rice
niger or eco-cleaning
ger with low
Amounts of active ingredients.
The energy consumption
needs and water
consumption is
speaking
fits.
4 Set up and
Connect
To ensure proper operation, connect
the device to electricity and water
properly. Please note the required
criteria and the assembly
instructions.

4.1 Scope of delivery

After unpacking, check all parts for
transport damage and that the
delivery is complete.
If you have any complaints, please
contact the retailer where you
purchased the device or our customer
service.
A notice:The device was checked at the
factory to ensure that it functions
properly. This may leave water stains
on the device. The water stains
disappear after the first rinse.
The delivery consists of:
dishwasher
¡Instructions for use
¡assembly Instructions
¡Further information documents
Mounting material
¡Steam protection plate
¡Salt filling aid funnel
Power cord
¡quick start Guide
4.2 Set up and connect the

device

You can install your under-counter
device or integrated device in the
kitchen unit between wooden walls
and plastic walls. If you subsequently
set up your device as a free-standing
device, you must secure your device
against tipping over, e.g. B. through
screw connections on the wall or
through installation under a
¡
¡
¡

Advertisement

Table of Contents
loading

Table of Contents