Table of Contents
Advertisement
NL Troubleshooting
Malfunction
Crockery is not dry.
Plastic crockery is not No fault. Due to a bearing
dry.
Cutlery is not dry.
44
Cause
Water remains in cavities
of crockery and cutlery
to stand.
The combined
detergent has poor
drying performance.
Extra dry for enhanced
drying is not activated.
Crockery is out too early
cleared or the drying
process had not yet ended.
Used rinse aid has
limited drying
performance.
heat storage capacity
dries plastic worse.
Cutlery is not properly
placed in the cutlery basket
or drawer.
Troubleshooting
Arrange the crockery at an angle as
▶
right in.
Use rinse aid to improve
1.
drying performance.
Use another combination
2.
detergent with better drying
performance.
Activate Extra Dry.
▶
Wait for the program end.
1.
Do not remove the dishes until 30
2.
minutes after the end of the
programme.
Use a quality rinse aid
▶
resourse.
Eco-products may have a
limited effect.
No solution available.
▶
Drops may form at the touch
points of the cutlery.
If possible, arrange the cutlery separately
1. "
from each other." → Page 31
Avoid touch points.
2.
Advertisement
Table of Contents
