S5130S-Si & S5130S-Li Switch Series - H3C S5560S-SI Series Installation Manual

Item
Melting
current of
power supply
fuse
Cooling
system
Operating
temperature
Operating
humidity
Fire
resistance
compliance
S5130S-SI & S5130S-LI switch series
Table1-7 Technical specifications for the S5130S-SI & S5130S-LI non-PoE switch models
Item
Dimensions
(H × W × D)
Weight
Console port
Management
Ethernet port
10/100/1000
BASE-T
autosensing
Ethernet port
SFP port
SFP+ port
Power supply
slot
S5500V3-28S-D S5500V3-54S-DP-
P-SI SI
•
CA-70A12 power supply: 10 A/250 V
•
PSR75-12A power supply: 3.15 A/250 V
•
PSR150-D1 power supply: 8 A/250 V
Left-right air aisle, intaking cool air from the chassis left side and exhausting hot air from the
chassis right side
–5°C to +45°C (23°F to 113°F)
5% RH to 95% RH, noncondensing
UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC 60950-1/GB4943.1
S5130S-28S-SI
S5130S-28S-SI-MM
S5130S-28S-SI-SM
S5130S-28S-LI
S5130S-28S-LI-MM
S5130S-28S-LI-SM
43.6 × 440 × 160 mm (1.72
× 17.32 × 6.30 in)
≤ 2.5 kg (5.51 lb)
•
1 × micro USB console port
•
1 × serial console port
Only the micro USB console port is available when you connect both ports.
N/A
24
N/A
4 (A 10-GE SFP+ transceiver module is built into port 28 on the S5130S-28S-SI-MM,
S5130S-28S-SI-SM, S5130S-28S-LI-MM, and S5130S-28S-LI-SM switches. For the
built-in transceiver module specifications, see Table4-15.)
N/A
S5500V3-36F-D
P-SI
S5130S-52S-SI
S5130S-52S-LI
43.6 × 440 × 230 mm (1.72
× 17.32 × 9.06 in)
≤ 3.5 kg (7.72 lb)
48
1-11
S5500V3-54F-DP-
SI
S5130S-28F-SI
43.6 × 440 × 360 mm (1.72 ×
17.32 × 14.17 in)
≤ 6 kg (13.23 lb)
1
8 (Each and its corresponding
SFP port form a combo
interface.)
24 (The eight
highest-numbered SFP ports
and their corresponding
10/100/1000BASE-T
autosensing Ethernet ports
form combo interfaces.)
2, on the rear panel