Philips AVENT SCF291 Manual page 7

12aaaEnglish
6 Remove the lid.
Wait until the appliance has cooled down before you remove the lid.
Be careful. Hot steam may come out of the sterilizer.
7 Remove the bottles and other items from the basket. Use the tongs to remove the
smaller items.
Be careful. The sterilized items may still be hot.
Note: Make sure you wash your hands thoroughly before you touch the sterilized
items.
8 Unplug the appliance and wait until the appliance has cooled down completely.
9 Remove the small basket and large basket.
Note: When you remove the large basket, be aware of the remaining water on the
base drip tray.
Note: The drip tray is designed for catching milk or food residue from the items to
avoid going into the water reservoir of the base. This is to optimize the sterilizing
performance and make the heating element easy to clean.
10 Detach the bottom plate from the large basket. Pour out any remaining water
from the large basket drip tray and clean it (see section "Cleaning").
11 Pour out any remaining water from the water reservoir and wipe it dry.
Note: The appliance does not work for 10 minutes after a sterilizing cycle. It needs
to cool down first.
Auto – Sterilizing + Drying (SCF293)
1 Pour water directly into the water reservoir of the base (see section "Before first
use").
2 Assemble the sterilizer (see section "Assembling the sterilizer") and place the
items to be sterilized in it.
Note: Make sure all the items are completely disassembled and placed in the
basket with their openings pointing down for effective drying.
Be careful. Hot steam will come out of the sterilizer when drying starts.
3 Place the lid on top of the small or large basket.
4 Put the plug in the wall socket.
5 Turn the on/off button to "Auto" mode. Then press it to
switch on the appliance.
• The appliance starts sterilizing first. The entire progress
indicator lights flash to show the appliance is sterilizing.
• After that, drying will start automatically. The progress
indicator lights flash and off gradually to show the
appliance is drying.
• When the whole process is finished, the lights go off and
the appliance switches off automatically.
Caution: The base, the baskets and the lid become hot during or shortly after
operation.
6 Remove the lid.
7 Remove the bottles and other items from the basket. Use the tongs to remove the
smaller items.
Be careful. The sterilized items may still be hot.
Note: Make sure you wash your hands thoroughly before you touch the sterilized
items.
Note: The drying result may vary depends on the ambient temperature, ambient
humidity and loading of sterilizer. You can run one more drying cycle if necessary.
8 Unplug the appliance and wait until the appliance has cooled down completely.
9 Remove the small basket and large basket.
Note: When you remove the large basket, be aware of the remaining water on the
base drip tray.
10 Detach the bottom plate from the large basket. Pour out any remaining water
from the large basket drip tray and clean it (see section "Cleaning").
Englishaaa13
1
2