ABB 10DX3111G Instruction Manual page 7

READ FIRST
Do not install, maintain, or operate this equipment without
reading, understanding and following the proper ABB
Instrumentation instructions and manuals, otherwise injury
All Flowmeters and/or Signal Converters being returned to
ABB Instrumentation for repair must be free of any
hazardous materials (acids, alkalis, solvents, etc). A Material
Safety Data Sheet (MSDS) for all process liquids must
accompany returned equipment. Contact ABB
Instrumentation for authorization prior to returning
All magnetic flowmeters supplied after March 1992 are provided with a corrosion resistant NEMA 4X
nish.
fi The NEMA 4X rating applies to the meter body and electronics enclosure only. The following
accessories (if supplied) may not meet NEMA 4X unless specifically ordered as NEMA 4X:
• meter flanges
• meter installation hardware: studs, nuts, bolts
• enclosure mounting hardware for pipe or wall mounting
• conduit hardware
This product is painted with a high performance epoxy paint. The corrosion protection provided by
this finish is only effective if the finish is unbroken. It is the users' responsibility to "touch-up" any
damage that has occurred to the finish during shipping or installation of the product. Special attention
must be given to: meter flange bolting, pipe mounting of electronics, conduit entries and covers that
are removed to facilitate installation or repair. For continued corrosion protection throughout the
product life, it is the users' responsibility to maintain the product finish. Incidental scratches and other
finish damage must be repaired and promptly re-painted with approved touch-up paint. Provide the
model number and size of your product to the nearest ABB Instrumentation representative to obtain
the correct touch-up paint.
10DX3111G INSTRUCTION MANUAL
WARNING
INSTRUCTION MANUALS
or damage may result.
RETURN OF EQUIPMENT
equipment.
Read these instructions before starting installation;
save these instructions for future reference.
III