Error Codes & Solutions - Iceco JP Series Manual

Error Codes & Solutions
4
※ The DC voltage is below the protection
E1
setting and the battery protection mode is
activated.
※ The cooling fan overloads with more
E2
than 1 A of current.
Motor start error
※ The motor of compressor is blocked or
E3
the pressure difference in the refrigeration
system is too high.
Minimum motor speed error
※ The compressor overloads and the
E4
motor can not maintain its minimun speed
1850 rpms.
Thermal cut-out of electronic unit
※ Thermal cut-out error If the refrigeration
E5
system overloads, or the ambient
temperature is too high, the thermal sensor
is overheated.
Error Code
06