Springfree SF90E Assembly, Installation, Care, Maintenance, And Use Instructions page 12

WARNING: Ensure the rods are seated
right down to the bottom of each
socket. Rods that are improperly
seated may eject unexpectedly,
which may cause injury.
12
Step 8: Inserting the irst rod
Find the net anchor strip with the holes in it
(along the base of the net). Insert a rod through
the hole where the vertical zipper comes to a
close.
Now, insert this rod into the ifth socket to
the right of the frame joint. If the rod is in the
correct (ifth) socket, its ball will be above this
frame joint when viewed straight on.
Step 9: Laying the enclosure net
At this point, lay the enclosure net around the
outside of the frame of the trampoline (Figure 9).
Step 10: Inserting the remaining
rods
Insert the remaining rods through each hole in
the bottom strip of the enclosure and into the
respective sockets.
Ensure the rods are seated right down to the
bottom of each socket.
Springfree™ Trampoline Model SF90E Trampoline and Enclosure Assembly, Installation, Care, Maintenance and Use Instructions Version 6.4
1st rod
horizontal zipper
Figure 8-A: Placing the irst rod
joint
Figure 8-B: The irst rod through the net and in its socket
Figure 9: The net laid around the frame
Figure 10: Inserting the remaining rods
vertical zipper
5th socket