JUKI LK-1900BN Series Instruction Manual page 62

No.
U042 Needle bar stop position is set.
: UP position
U046 Thread trimming can be prohibited.
: Normal
U048 Route of origin return by means of clear key can be selected.
: Straight line return
U049 Bobbin winding speed can be set.
U050 Operation timing of material closing is selected. LK-1901BN
only
Output prohibited
: Operation when work clamp foot comes down.
: Operation at the time of start
Wiper operation method can be selected.
U051
: Without wiper at the time of thread trimming on the way
: With wiper at the time of thread trimming on the way ①
: With wiper at the time of thread trimming on the way ②
: Magnet wiper
U055 Effective/ineffective of tie stitching for button sewing can be
selected.
: Tie stitching effective
U064 The dimension input increment can be selected.
: In percentage (%)
U065 Y origin shift method can be selected.
: Standard
U069 Common/individual of the 2-step stroke height is selected.
: Common
: Individual (the height can be set with respect to each direct pattern)
U070 Display/hide of the travel of the last stitch can be set.
: Hide
The fan operation can be set.
U074
: Energy saving mode
U075 With/without air pressure detection
: Without
* This memory switch is displayed only for the LK-1900BBN, LK-
1903BBN.
Function
: Upper dead point
: Thread trimming prohibited
: Reverse return of pattern
: Tie stitching ineffective
: In dimension
: Offset by −5 mm (for 1904 work clamp)
: Display
: Constantly operates
: With
－
Setting range State when delivered
-
-
-
800 to 2000
-
-
-
-
-
-
-
-
-
－
59
Remarks
Needle bar rotates
in the reverse direc-
tion after the UP po-
sition stop and stops
when upper dead
point stop is set.
T h i s f u n c t i o n i s
used when straight
line return from the
midway of pattern
to the start of sew-
ing is not possible.
1600 Max. speed limita-
tion has priority.
For the machines
o t h e r t h a n L K -
1901BN, this func-
tion is not indicat-
ed.
① : Without return
of the last wiper
② : With return of
the last wiper
.