JUKI LK-1900BN Series Instruction Manual page 61

Hide thumbs Also See for LK-1900BN Series:
Table of Contents

Advertisement

No.
U025
Optional pedal 2 operation
OFF when depressing pedal again
OFF when detaching from pedal
Height of work clamp foot at the time of 2-step
U026
stroke
U030
Selection of base point of pattern enlargement/reduction
: Origin
: Sewing start point
U031
Sewing machine operation can be stopped with panel key (clear key).
: Ineffective
U032
Buzzer sound can be prohibited.
: Without buzzer sound
: Panel operation sound + error sound
U033
Number of stitches that needle thread clamp
releases is set.
Clamping timing of needle thread clamp can be
U034
delayed.
U035
Needle thread clamp control can be prohibited.
: Normal
U036
Feed timing is selected.
When stitches are not well-tightened, set the value in
"–" direction.
State of work clamp foot after completion of sewing can be selected.
U037
: Work clamp foot goes up after moving at the sewing start
: Work clamp foot goes up immediately after the end of sewing.
: Work clamp foot goes up by pedal operation after moving
at the sewing start.
U039
Execution of origin retrieval every time after completion of
sewing can be performed.
(Except cycle stitching)
: Without origin retrieval
Setting of origin retrieval in cycle stitching can be set.
U040
: Without origin retrieval
: Every time 1 pattern is completed
: Every time 1 cycle is completed
U041
State of work clamp foot when machine stopped by temporary
stop command can be selected.
: Work clamp foot goes up.
: Work clamp foot goes up with work clamp foot switch.
: Lift of work clamp foot is prohibited.
Function
: Panel RESET key
: External switch
: Panel operation sound
: Prohibited
: With origin retrieval
Setting range State when delivered
-
50 to 90
-
-
-
1 to 20
stitches
− 10 to 4
-
− 8 to 16
-
-
-
-
58
Remarks
70
Height is lowered
when the set value
is increased.
2
4
Timing is delayed in
"-" direction.
M i s a p p l i c a t i o n o f
panel is protected.
For LK-1903BN, set
to "
".
12
Setting on exces-
sive "–" side may
cause needle break-
a g e . B e c a r e f u l
when sewing heavy-
weight material.
F o r L K - 1 9 0 3 B N /
BR35, set to "
".

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents