Table of Contents
Advertisement
LEFT
LEFT
RIGHT
RIGHT
Carefully insert the front brake disc plate between the
caliper brake pads.
A: Pads
B: Disc plate
Attach the spacers to the front wheel hub as shown in
the photographs.
NOTE:
The large flange side of the spacer faces the
hub.
A: Front wheel spacer
Insert the front axle from the left side of the fork legs.
Never use force to install the front axle.
If it cannot be installed by hand, it is not cor-
rectly aligned.
Place the washer on the right end of the front axle.
A: Front axle
B: Washer OD:20.0 mm ID:12.5 mm
Tighten the front axle nut to the specified torque.
Front axle nut: 44 N·m (4.4 kgf-m)
Insert the cotter pin through the axle shaft and
bend the ends properly.
A: Axle nut 12 mm
B: Cotter pin L:27.0 mm
9
Hide quick links:
Advertisement
Table of Contents
