Table of Contents
Advertisement
Available languages
Available languages
Model assembly
Wing installation
1. Attach the Y harness to the servo leads on the wing and
the receiver. Attach the wing to the fuselage and secure with
the included bolts. Make sure the servo wires are not
pinched in the process.
2.With the aircraft inverted, connect the struts as indicated
in the diagram.
3.Install the landing gear onto the fuselage.
04
HKM3.0*20mm
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Arrows 1100mm J3 Cub and is the answer not in the manual?
Questions and answers