Page 1
HIM-14011 Document No. MP-A01 Part No.3096-0001 Instruction Manual S20213 April 9, 2020 K. Ikeshita J. Tonai Y. Hashimoto S14284 June 16, 2014 T. Hirakawa K. Yotsutani Y. Hashimoto Rev. Date Prepared by Checked by Approved by Confidential C I-PEX Inc.
Page 2
Document No. MP-A01 Instruction Manual HIM-14011 弊社製実装クリップ MP-A 01 の取り扱いに際して、本製品を安全にご使用頂くことを目的とし、取扱い上の注意点を記述致します。 This manual provides cautions to handle our mount clip MP-A 01 properly and safely. ◆実装クリップ /Mount clip 名称/Product Name : MP-A 01 型番/Part No. : 3096-0001 嵌合方向 ケーブル /Cable Mating direction MP-A 01 ◆対応クランプ・ケーブル...
Page 3
Document No. MP-A01 Instruction Manual HIM-14011 【ケーブル挿入手順 / How to mating a cable】 1. ケーブルセット / Placing a cable Fig.2 のようにガイド形状に合わせケーブルをセットします。 Place a cable on the cable guide shown in Fig.2. ケーブルセット状態 ガイド形状 /Cable guide /Cable set in a proper position ケーブル/Cable...
Page 4
Document No. MP-A01 Instruction Manual HIM-14011 【ケーブル抜去手順 /How to un-mating a cable】 Fig.6 のようにバネ両側のケーブルを真上に引っ張る、もしくは Fig.7 のように片側を真上に引っ張り、抜去して下さい。 Hold the cable at the both sides of the mount clip and pull it straight up as shown in figure 6 or pull one end of the cable and pull it up straight as shown in figure 7.
Page 5
Document No. MP-A01 Instruction Manual HIM-14011 【ケーブル取扱いの注意 /Caution for handling a cable.】 Fig.10 のようにクリップのバネ部に常に力が加わるようなケーブルの引き回しを行うと、嵌合外れやバネの変形等の恐れがありますので、ご 注意願います。 If the force was applied to the spring of the mount clip for long time by pulling the cable, un-mating or deformation of the spring may occur.
Need help?
Do you have a question about the MP-A01 and is the answer not in the manual?
Questions and answers