Advertisement
Always use the pressure reducing valve corresponding to the above mentioned outlet pressure.
Injector
Category
Butane
I3+(28–30/37)
Propane
I3B/P(30)
I3B/P(50)
Butane, propane,
or their mixture
I3B/P(37)
The information on the injector, e. g. "1.90," indicates the injector size, e. g. 1.90 mm.
The gas hose and pressure reducing valve must comply with local regulations.
The device requires a 1.4 m long approved hose.
Assembly parts
Tools needed
10 mm and 13 mm open end wrench
20 cm adjustable spanner (2)
23 cm slip joint pliers
Philips screwdriver with medium blade
Spray bottle of soap solution for leak test
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Gas pressure
Gas type
(mbar)
28–30
37
30
50
37
Item 63021
Total heat input
(heating value H
:
S
rated power Q
) (㎾)
N
13
(G30: 945
g
⁄
;
h
G31: 929
g
⁄
)
h
Injector size (㎜)
1.90 (main burner)
0.18 (pilot burner)
1.70 (main burner)
0.18 (pilot burner)
1.80 (main burner)
0.18 (pilot burner)
Page 8
04
2021-1
Advertisement
