Advertisement
Step 3:
Place the tank housing on the stand.
Step 4:
1. Remove the 4 bolts from the burner.
2. Put the gas hose through into the post.
3. Fix the burner unit to the post by the 4 bolts.
Step 5:
1. Check whether the connection of vertical post
and burner are assembled according to instruc-
tions, and all bolts and nuts are tightened.
2. Put 6 pieces large flat washers on 3 reflector
spacers.
Step 6:
Fasten the reflector with 3 pieces large flat wash-
ers and 3 pieces wing nuts.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 63021
Page 11
04
2021-1
Advertisement
