Advertisement
Hardware contents (actual size shown)
M8 flange nut
M8×16 bolt
(2×)
⌀
⌀
8 washer (9×)
6 washer (9×)
Assembly
Step 1:
1. Put the 3 pieces post brackets on each position
on the base as shown.
2. Use 3 medium M8×16 bolts to join the post
brackets and stand.
Step 2:
1. Put the post on the top of 3 pieces post brack-
ets.
2. Use 6 large M6 bolts and flange nuts to con-
nect the post to the 3 pieces post brackets.
Tighten the bolts and nuts.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
M6 flange nut
(5×)
(6×)
M6×10 screw
(9×)
Stainless steel
bolt (4×)
Cap nut (9×)
Item 63021
M6×30 bolt
Reflector
(6×)
spacer (3×)
Wing nut (3×)
Wrench (1×;
not actual size)
Page 10
04
2021-1
Advertisement
